raltron electronics corporation 10651 nw 19th st. miami, florida 33172 u.s.a. tel: 305-593-6033 fax: 305-594-3973 e-mail: sales@raltron.com internet: http://www.raltron.com series h13 surface mount microprocessor crystal example: h13-32.000-18-1030-ext-tr features specifications part numbering system 1.55 .05 dia .06 .002 dia .16 .004 4 0.1 1 . 7 5 0 . 1 . 0 6 9 . 0 0 4 1.8 0.1 .071 .004 1 6 0 . 3 . 6 3 0 . 0 1 2 7 . 5 0 . 1 . 2 9 5 . 0 0 4 .315 .004 8.0 0.1 7 . 5 0 . 1 2 0.1 .079 .004 . 2 9 5 . 0 0 4 solder reflow profile outline drawing carrier tape dimensions scale none dimensio n in mm inch solder pattern 255mm reel diameter 16mm tape width, 8mm pitch quantity: 1000 pieces per reel packaging low profile tight tolerance and stability to 10 ppm wide frequency range frequency (fund) esr (ohm) max frequency (fund) esr (ohm) max frequency (3ot) esr (ohm) max 6.00 100 23.040 35 40.00 65 7.60 60 24.00 35 40.320 65 8.00 60 24.576 35 44.2368 65 10.00 60 27.00 35 52.416 65 12.288 60 28.00 35 56.448 65 14.31818 45 28.63636 35 66.667 65 14.7456 45 29.4912 35 70.00 65 15.00 45 32.00 35 80.00 65 15.360 45 36.00 35 90.00 65 16.00 35 40.00 35 92.00 65 16.9344 35 40.320 35 98.304 65 18.432 35 48.00 35 100.00 65 19.6608 35 49.152 35 20.00 35 50.00 35 pin connect - top view frequency range 6.00 mhz to 100.00 mhz mode of oscillation (6.00 to 50.00 mhz) fundamental (40.00 to 100.00 mhz) third overtone frequency tolerance at 25c 50 ppm maximum (10 ppm, 30 ppm available) frequency stability over temperature 50 ppm maximum (10 ppm, 30 ppm available) operating temperature range -10c to +60c standard -30c to +85c extended storage temperature range -40c to +85c aging 5 ppm per year max. load capacitance 12 pf to 32 pf or series equivalent series resistance (esr) see table shunt capacitance 7.0 pf maximum drive level 1 w to 100 w reflow conditions 260 c for 10 s max 2 reflows max holder type frequency load capacitance tolerance / stability extended temperature tape and reel tr - ext - mode - - f 3ot fundamental third overtone (ppm/ppm) examples: 1030, 3030 h13 - - 12 to 32 pf for parallel s for series in mhz 4 3 2 1 marking area .276 .006 7.0 0.15 . 1 9 7 . 0 0 6 5 . 0 0 . 1 5 .043 .008 1.1 0.2 . 0 3 9 1 . 0 .177 4.5 2 . 5 4 .012 r 0.3 r . 1 0 0 .087 2.2 .157 4.0 .087 2.2 .056 1.4 . 0 5 6 1 . 4 . 0 4 3 1 . 1
|
